Some Water Facts about the Bathroom:
- A bath uses 80 litres of water. In 5 minutes a standard shower uses 35 litres and a power shower uses 90 litres of water.
- Low flush toilets use 6 litres of water per flush, pre-2001 cisterns use 9 litres and older cisterns can use up to 13 litres per flush.
- Brushing your teeth with the tap running can use 6 litres of water per minute.
- Around 30% of water in an average household is used to flush the toilet.
- So, why not take a shower instead of a bath?Watch out for power-showers though, they use as much water as a bath! For a free shower timer that will challenge you to only take 4 minutes, visit www.getwaterfit.co.uk and complete our online water audit to receive your free 4 minute timer and other water saving goodies.
Water saving tips
Take a shower instead of a bath
Fit an aerating shower head
Let the ‘yellow mellow’: Toilet flushing is one of the biggest water users in most homes. Consider only flushing the toilet when you really need to. Adding a toilet cistern bag to your cistern will reduce the amount of water used in every flush.
Choose a low flush model with a dual flush system
Check that your overflow is not running and that water is not running into the bowl between flushes. These could indicate that the ball cock is set too high, or that there is a fault in the syphon or flush valve
In 9+ litre cisterns use a Save A Flush bag to reduce water use. Save a Flush are not suitable for low flush or dual flush toilets. Save a Flush bags are free and available by visiting www.getwaterfit.co.uk and completing our online water audit.
Turn off the tap when you brush your teeth and use a beaker of water to rinse
Super Tip: ALWAYS mend leaking taps!
Contact Information
Waterline 0345 744 0088 (Lines open 24 hours 7 days a week)
Operational emergencies, service requests, fault reporting and complaints
Leakline 0800 028 2011 (Lines open 24 hours 7 days a week)
Reporting leaks in public supply system
